All our installers are certified and have the most experience of installing systems based on electrical electroosmosis in Sweden. Installing our technology for over 3,000 customers with widely differing conditions in terms of construction and ground conditions, has taught us how to get the best possible results. Electro Drain's solution is based on three interacting factors: the ion generator, the electrodes and the assembly.<\/p>\n
The ion generator <\/strong>must deliver the right type of pulses, at the right speed for the signal to drive the moisture out of the structure in an efficient way. In previous solutions, the drying effect was directly related to energy consumption, which made them inefficient and costly. With the help of intelligent technology, Electro Drain delivers high drying power without the corresponding energy consumption.<\/p>\n The electrodes <\/strong>must be able to transmit the signals to the structure without loss of power and without deterioration over time. Electro Drain works with an electrode which, in combination with a special contact paste creates maximum contact between the electrode and the construction and protects the electrode against corrosion.<\/p>\n Finally, the installation<\/strong>must be carried out professionally by technically knowledgeable installers, who can solve the problems that may arise. Normally the electrodes are mounted on the inside of the outer walls, approx. 5 cm above the floor, and if necessary, also in inner walls and slabs. The installation usually takes one day, and the effects begin to be seen within a week or so.<\/p>\n\n\n